Brother NX-450 - Manual (Page 60)

Adjusting the Stitch Width and Length 59
2
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Adjusting the stitch length
The stitch length can be adjusted to make the stitch
longer or shorter.
a
Turn on the sewing machine.
X The LCD comes on.
b
Select a stitch.
X A screen containing settings for the selected
stitch appears.
• For details on selecting a stitch, refer to
“Selecting stitching” (page 72).
• Immediately after the stitch is selected, the
standard settings (highlighted) appear.
c
To make the stitch length shorter, press
(Stitch length key). To make the stitch length
longer, press (Stitch length key).
X The stitch length is changed.
• If the setting is changed, the highlighted
value is erased.
Memo
z To reset the stitch length to its standard
setting, select the same stitch again or
change the setting to the highlighted value.
z Press (Reset key) to return the stitch
width, stitch length to their default settings.
z The settings can be saved so that they will
always be specified each time the utility
stitch is selected. For details, refer to “Saving
stitch settings” (page 63).
z indicates that the setting cannot be
adjusted.
CAUTION
● If the stitches are bunched together,
increase the stitch length. Continuing to
sew with the stitches bunched together
may result in the needle bending or
breaking.
– +