Barco RLM G5I PERFORMER R9010320 - Manual (Page 114)

12. Image Files Menu
On The projector will switch the file when the source settings change.
Off The projector stays on its active file even when the settings of the source change.
Image 12-20
12.11 Zoom-Focus
The Zoom-Focus setting is only valid when the projector is equipped with TLD lenses.
What can be done ?
When TLD lenses are used, it is possible to store the zoom and focus setting for each file separately.
How to set ?
1. Press MENU to activate the menu bar.
2. Press → to select the Image files item. (image 12-21)
3. Press ↓ to pull down the Image files menu.
4. Use ↑ or ↓ to select Zoom/Focus.
5. Press → to display the choices.
6. Use ↑ or ↓ to select desired choice.
Universal The same zoom/focus setting will be used for all files.
Unique The zoom/focus settings will be stored file per file.
Image 12-21
112 R5976815 RLM G5I PERFORMER 02/06/2006