4 cleaning the lens, 6 battery insertion in the remote control, Battery insertion in the remote control – Barco RLM G5I PERFORMER R9010320 User Manual

Page 14: Cleaning the lens

Advertising
background image

2. Installation Guidelines

How to replace with another lens?

Follow the next procedure:
1. Move the handle (A) of the lens anchor system to the left and take out the lens.

2. Take the new lens assembly out of its packing material and remove the lens caps on both sides.

3. Push the lens, motors at the top, in the lens block gap horizontally, lining up the motor connector on the lens with the connector

on the lens block (B). (image 2-4)
Caution:

On a table mounted projector, hold the projector when pushing the lens into the lens block to avoid sliding off from
the table.

4. Move the handle (A) of the lens anchor system to the right (front view, table mount) to lock the lens.

Image 2-4

2.5.4

Cleaning the lens

To minimize the possibility of damage to optical coatings, or scratches to lens surfaces, we have developed
recommendations for clean. FIRST, we recommend you try to remove any material from the lens by blowing
it off with clean, dry deionized air. DO NOT use any liquid to clean the lenses.

Necessary tools

Toraysee

TM

cloth (delivered together with the lens kit). Order number : R379058.

How to clean the lens ?

Proceed as follow :
1. Always wipe lenses with a CLEAN Toraysee

TM

cloth.

2. Always wipe lenses in a single direction.

Warning:

Do not wipe back and forwards across the lens surface as this tends to grind dirt into the coating.

3. Do not leave cleaning cloth in either an open room or lab coat pocket, as doing so can contaminate the cloth.

4. If smears occur when cleaning lenses, replace the cloth. Smears are the first indication of a dirty cloth.

C

AUTION

:

Do not use fabric softener when washing the cleaning cloth or softener sheets when drying the

cloth.

Do not use liquid cleaners on the cloth as doing so will contaminate the cloth.

Other lenses can also be cleaned safely with this Toraysee

TM

cloth.

2.6

Battery Insertion in the Remote Control

Where to find the batteries

The batteries are not placed in the remote control to avoid remote control operation in its package, resulting in a shorter battery life
time.

12

R5976815 RLM G5I PERFORMER 02/06/2006

Advertising