Barco RLM G5I PERFORMER R9010320 - Manual (Page 124)

13. Display Setup
3. Press ↓ to pull down the Display setup menu.
4. Use ↑ or ↓ to select ScenergiX.
5. Press → to select the ScenergiX item.
6. Use ↑ or ↓ to select Border.
7. Press ENTER to select.
A dialog box will be displayed. The actual scenergix border will be displayed.
8. Use ↑ or ↓ to select the desired adjustment.
Image 13-20
Adjusting with the arrow keys.
1. When on an adjustment, use the → or ← key to move the border line to the desired position.
The border line will move in the desired direction and the light output in the overlap area will be adapted to. (image 13-21)
Set first the width of the first projector and repeat for the second one. (image 13-22, image 13-23)
Image 13-21
Width selections
122 R5976815 RLM G5I PERFORMER 02/06/2006