BlueAnt Interphone - Manual (Page 8)

7
Basic Operations
IMPORTANT:
The BLUEANT INTERPHONE needs to be ‘paired’ with your Bluetooth mobile
phone before you can use the following functions. (See Pairing to your
Bluetooth Mobile Phone on page 3.)
Make a Call:
Dial the number using your phone as normal. Audio will automatically be on the
headset.
Note: With some phones like Siemens S55 and Panasonic X70, audio is always
on the phone during an outgoing call. You will need to press MFB(1) to transfer
the audio to your headset.
Answer a Call:
To answer an incoming call just press the MFB(1) for 1 second (1 st beep).
Or, Assuming the InterPhone Voice Answer and Reject is activated:
Accept a call by loudly saying a word within 10 seconds. (Example: When you
receive the ring tone, Say loudly ”Hello!”) The call will be answered. Audio will be
on the headset.
Note: See InterPhone Voice Dial and Reject Activation / Deactivation on page 10
End a Call:
Press the MFB (1) for 1 second to end the call (1
st
beep).
Voice Dial:
Important: First, make sure to activate the voice dial function of your phone.
Record at least one voice tag. (Kindly refer to the procedure in your phone’s
manual.) Note: Voice dialing entries must be stored in the phone’s memory, not on
the SIM card!
1. Press MFB (1) for 1 second ( 1 st beep) to manually activate voice dialing. The
Voice dial tone/ beep will be heard on the headset prompting the user to say
the voice tag of the contact to call.
2. Say the voice tag. The voice will be played back to you then the phone will
dial the number automatically.