Brother HL-2400Ce - Manual (Page 50)

CHAPTER 2 SETTING UP THE PRINTER
2–21
✒ Notes
•
The installer automatically updates your SYSTEM.INI Windows

file
by adding DEVICE=bi-di.386 under the [386Enh] section. If any bi-
directional parallel communications device driver was installed
previously, it will be deactivated by the new driver. If you wish to
use old driver, you should re-install it. Re-installing the previous
driver will make the new HL-2400Ce driver inactive.
•
The installer makes the installed printer driver the Windows

default.
•
The installer automatically sets the printer port to the parallel
interface, LPT1.
•
During this installation, changes have been made to the SYSTEM.INI
file. It is necessary to restart Windows

so that the changes become
effective and the installed bi-directional parallel communications
device driver can take effect.
For Macintosh Users
✒ Note
•
The installer for the Macintosh driver works on OS System version
7.5.3 or higher.
•
The PPD file can be used in Laser Writer Driver version 8.4.3 or
higher.
1. Insert the CD-ROM into your CD-ROM drive.
2. Double click the 'BR-Script PPD Installer' icon.
3. Follow the instructions that appear on the screen.
✒ Notes
For installation of other printer drivers and information on the latest
printer drivers see:
http://www.brother.com