B&B Electronics 3PCIU4 User Manual
Page 26
Driver Software Installation
20
Chapter 3
Manual Documentation Number 3PCIoUx-1008
11. Click
Continue Anyway
.
A dialog box will appear indicating the software installation is
proceeding.
12. When the
Completing the Found New Hardware Wizard
dialog
appears, click Finish.
Port Driver Installation
The Welcome to the Found New Hardware Wizard will appear again,
indicating it has detected a port on the PCI card. Repeat the steps above to
install the port driver software.
If the card you are installing has more than one port, Windows XP will find
each port in sequence and re-launch the
Found New Hardware Wizard
for
each port. Repeat the previous steps for each port.
Checking the Driver Installation
You may want to check to verify that the new B&B COM ports are now
available.
1. From the Windows Desktop, click
Start → Settings → Control
Panel → System
2. On the
System Properties
dialog box, click the
Hardware
tab, then
click the
Device Manager
button. The
Device Manager
window
will appear: