Sewing chapter 2, Trial sewing, Sewing using a utility stitch – Brother PC-2800 User Manual
Page 30: Sewing
27
1. SEWING
CHAPTER 2
TRIAL SEWING
Sewing using a utility stitch
1. Turn on the sewing machine. The straight stitch (left) is se-
lected.
2. Install the correct presser foot. Place the fabric under the
presser foot, then pull out about 5 cm (2") of the upper thread
and pass it under the presser foot toward the rear of the ma-
chine.
1
Upper thread
2
5 cm (2")
CAUTION
Always use the correct presser foot. If the wrong
presser foot is used, the needle may strike the
presser foot and bend or break, resulting in injury.
1
2
1
3
4
5
2
CAUTION
• To avoid injury, pay special attention to the needle while the machine is in operation.
Keep your hands away from moving parts while the machine is in operation.
• Do not stretch or pull the fabric during sewing. Doing so may lead to injury.
• Do not use bent or broken needles. Doing so may lead to injury.
• Take care that the needle does not strike basting pins or other objects during sewing.
Otherwise, the needle may break and cause injury.
• If stitches become bunched, lengthen the stitch length setting before continuing sewing.
Otherwise, the needle may break and cause injury.
SEWING