Brother PC-2800 - Manual (Page 72)

69
CHANGING THE LIGHT BULB
1
2
CAUTION
• Turn off the main power switch and unplug the machine before changing the light bulb. If
the machine is on and the “Start/Stop” button is pressed accidentally, injuries may result.
• To avoid burns, give the light bulb time to cool before changing it.
1. Turn off the main power switch.
2. Use a screwdriver to loosen the screw on the back of machine
light cover. Then remove the light cover.
1 Screw
2 Light cover
3. Remove the light bulb as shown, and align the projection on
the light bulb with the notch in the socket. Replace it with a new
light bulb.
CAUTION
Use only light bulbs intended for use with this machine
(12V/ 5W: part no. XA2037001). You can get the proper light
bulb at your authorized dealer.
4. Replace light cover and tighten the screw on the back of the
machine.
CONTENTS
BEFORE USE
SEWING
UTILITY STITCHES
MAINTENANCE
SEWING CHAR
T
P
A
TTERNS
(PR
OGRAMMED IN
MA
CHINE)