Philips goLITE BLU luz de energía - Manual (Page 18)

pausing a session
1 Press the on/off button or press the minus button to reduce the
intensity to 0%.
, The remaining minutes of the session are still shown on the display.
2 Press the on/off button to continue the session or press any of the
touchscreen buttons to end the session.
Note: If you pause a session while the appliance operates on battery power
and do not continue the session within 5 minutes, the appliance switches off
automatically.
setting the alarm
The alarm has three modes: chime only, light only or both chime and light.
1 Press the on/off button briefly to switch on the appliance (Fig. 8).
, The touchscreen display goes on.
2 Press the alarm button (Fig. 14).
, The alarm indications start to flash (Fig. 15).
3 Press the plus or minus button to switch between the three alarm
modes: chime only, light only or both chime and light (Fig. 11).
4 Press the alarm button twice or wait 10 seconds to store the
selected mode.
5 To set the alarm time, press the alarm button twice.
, The alarm time starts to flash.
6 Press either the plus or the minus button to set the desired time. If
you keep the button pressed, the time moves forward or backward
quickly.
7 Press the alarm button or wait 10 seconds to store the set alarm
time.
Note: The set alarm mode and time remain stored in the memory as long as
there is energy in the battery.
EnglisH 18