Baumfolder Baumcut Programmable 26.4 - Manual (Page 34)

K4 - 6
4.0 Manual Operation
Clamping with False Clamp Plate
The clamp plate avoids clamping marks on sensitive stock.
Attaching false clamp plate:
Push plate against clamp from underneath until you hear guide pins (6.1)snap.
Removing of false clamp plate:
1. Lower clamp with pedal approx. 2" above table and fix it in this position.
2. Press two screw drivers simultaneously into the drillings (6.2) in the
clamp.
False clamp plate is dropped!
6.2
6.1