Block programming – Baumfolder Baumcut Programmable 26.4 User Manual

Page 74

Advertising
background image

K5B - 14

Block Programming

5.0 Automatic Operation

Four trim cut
with labels

Example: Variation 3, selection :

3 Four trim cut with labels

1.

Select

"Four trim cut with labels"

2.

Menu:

1 Orig. sheet size
2 Sheet size tables
3 Lay guide lft / ri

With this menu it is able to enter the original sheet size manually or to select a
sheet size from a sheet size table.

3.

e.g.: Enter Orig. sheet size

4.

Enter Original sheet size X, confirm with key

5.

Enter Original sheet size Y, confirm with key

or

6.

e.g.: Sheet size tables

7.

Select left-hand lay side (=default) or right-hand lay side:

Example: Select right-hand lay side by means of key

8.

Select desired sheet size by means of the cursor keys and confirm with

key

Confirm the sheet orientation or turn sheet orientation (observe paper grain)

Menu:

1 Sheet orientation OK
2 Turn sheet

9.

e.g.: Sheet orientation OK:

To be continued with next page!

Advertising
This manual is related to the following products: