Contact your local service center – Brother XL-6063 User Manual
Page 93
82
MAINTENANCE
MANTENIMIENTO
MANUTENZIONE
No
Page 8
Foot controller is not
used correctly.
MACHINE IS
NOISY OR SLOW
MACHINE DOES
NOT START
CONTACT YOUR LOCAL SERVICE CENTER
FABRIC DOES
NOT FEED
PROPERLY
No
Page 24
Stitch Length Dial is
set at no feeding.
("0")
No
Page 79
No
Page 5
Lint is clinging to the
bottom of the needle
plate.
Power supply plug is
removed from outlet.
No
Page 39
The combination of
needle size/thread
size/fabric is
incorrect.
No
Page 7
Main power switch
is turned off.
No
Page 9
Inferior needle is
used.
No
Page 29
The bobbin winder
shaft is slid to the
right.
No
Page 33
Thread is tangled.
No
Page 55
(Not available on models
XL-6040, XL-6041,
XL-6042, and XL-6043)
The buttonhole lever
is pushed toward the
back of the machine.
NEEDLE
BREAKS
No
Page 9
Needle is not
correctly inserted.
No
Page 9
Inferior needle is
used.
No
Page 39
The combination of
needle size/thread
size/fabric is
incorrect.
No
Fabric is pulled
excessively. Let the
feed dogs move the
fabric. Do not pull
the fabric.