BT Zenith Flip 6861 - Manual (Page 19)

Switch handset on/off
1. Press and hold to switch the handset off.
2. Press again or place it in the base to switch the
handset back on.
Make a call
1. Press . Calling is displayed.
2. Dial the number.
Preparatory dialling
1. Enter the number first. If you make a mistake, press the
option button underneath Clear in the display to
delete any digit.
2. Press to dial.
End a call
Press . The call timer shows the duration of
your call. Or close the handset.
You can dial up to 25 digits using
preparatory dialling.
If you are connected to a
switchboard and need to enter
a pause after the switchboard
access code, press and hold the
UP navigation button. The display
shows P’ to indicate a pause has
been set.
Call timer
The Call Timer shows the duration
of your call and is displayed 15
seconds after dialling.
BT Zenith Flip – Issue 1 – Edition 04 – 08.09.05 – 6861
If you experience any problems, please call the Helpline on 0870 605 8047
Using the phone
19