BT Zenith Flip 6861 - Manual (Page 70)

Additional handsets and bases
Up to 5 handsets can be registered and operated from
the BT Zenith Flip. Each handset can be registered with
up to four bases. You can make internal calls between
two handsets while third is making an external call.
Register a new BT Zenith Flip handset to your
BT Zenith Flip base
Insert batteries on the handset, charge the handset for
24 hours.
Make sure the handset is close to the base.
At the base:
Press and hold until the base gives a double beep.
The In Use light flashes. You now have 90 seconds to
register the handset.
At the handset:
1. Select Menu then scroll UP/DOWN/LEFT/RIGHT to
Registration . Select OK . Register Handset is
highlighted.
2. Select OK . If you have more than one base, scroll
UP / DOWN to select the base. Bases already in use are
indicated by a * . Select OK .
3. Enter the base’s SYSTEM PIN (original setting 0000 ).
Select OK to begin registration.
70
BT Zenith Flip – Issue 1 – Edition 04 – 08.09.05 – 6861
If you experience any problems, please call the Helpline on 0870 605 8047