BT Zenith Flip 6861 - Manual (Page 71)

4. Select Option . The handset screen shows Handset
Registered .
When a handset is registered to a base, it is
automatically assigned a number which is displayed on
the handset and must be used for internal calls.
Register handset with another BT Zenith Flip base
1. Select Menu and scroll UP/DOWN/LEFT/RIGHT to
Registration .
2. Select OK . Register Handset is highlighted.
3. Select OK . The current base is marked with a * . Scroll UP
or DOWN to select the base you want. Select OK .
4. Enter the base’s SYSTEM PIN.
5. Select OK . The display shows Base Search 2 . You now
have 90 seconds to register the handset.
At the base:
6. Press and hold until you hear the base beep.
The handset screen shows Handset Registered .
You can now use the handset.
71 Additional handsets and bases
BT Zenith Flip – Issue 1 – Edition 04 – 08.09.05 – 6861
If you experience any problems, please call the Helpline on 0870 605 8047
If registration does not work:
Try again selecting a different
base number.
Make sure there is no other
electrical equipment very close
by that may interfere with the
registration signal.