BT Zenith Flip 6861 - Manual (Page 69)

3. Press UP or DOWN to highlight Off . Select OK to confirm.
4. Select Back to return to the previous screen.
Alarm ringtone
1. Select Menu and scroll RIGHT to Time Settings .
Select OK . Alarm is highlighted.
2. Select OK and scroll DOWN to Set Alarm Tone .
3. Select OK . Scroll UP or DOWN a sample of each alarm
tone is played. Select OK to select the alarm tone.
4. Select Back to return to the previous screen.
Set date and time
1. Select Menu and scroll RIGHT to Time Settings .
Select OK and scroll DOWN to Set Date & Time .
2. Select OK . Enter the date, e.g. 19 05 for 19th May.
3. Select OK . Enter the time, e.g. 14 30 for 2.30pm.
Select OK to confirm.
4. Select Back to return to the previous screen.
69 Time settings
BT Zenith Flip – Issue 1 – Edition 04 – 08.09.05 – 6861
If you experience any problems, please call the Helpline on 0870 605 8047
If the mains power connection to
the base is lost the date and time
must be reset.
If the batteries are removed from a
registered handset, the clock is
automatically reset by the base.
If you have subscribed to your
network’s Caller Display service,
the time is set automatically when
you receive your first call.
However, you will need to set the
date manually.
Choose from 4 ringtones.