BT Zenith Flip 6861 - Manual (Page 32)

5. Select OK to confirm. The entry selected is assigned to
that number.
6. Select Back to return to the previous screen.
Dial a FastCall entry
Press and hold the 0-9 button you have set. The entry
name and number is displayed and dialled.
Copying from SIM
You can copy the SIM directory of a compatible GSM
mobile phone to a BT Zenith Flip handset. Entries are
copied one by one from the SIM card.
When you copy the whole phonebook or SIM card, it will
add to the entries already stored.
You only need to follow instruction 1 if you are
copying without PIN protection
1. Disable the PIN code of the SIM card on your mobile
phone. See your mobile user guide for details.
2. Insert the SIM card into the SIM compartment located at
the back of the base.
3. On your BT Zenith Flip handset, select Names .
32 Using the phonebook
DO NOT ATTEMPT TO
DOWNLOAD THE PHONEBOOK
FROM 3G SIM CARDS.
The SIM card reader in the BT Zenith
Flip base is not compatible with 1.8V
SIM cards (only available with 3G
phones, at the time of writing).
IMPORTANT
Your BT Zenith Flip will only copy
numbers stored on your SIM card.
If fewer numbers than you expect
copy into your BT Zenith Flip,
check that all numbers are stored
on your SIM and not on your mobile
phone. Refer to your mobile phone
user guide for instructions on how
to do this.
BT Zenith Flip – Issue 1 – Edition 04 – 08.09.05 – 6861
If you experience any problems, please call the Helpline on 0870 605 8047