Document feedback – Brocade Communications Systems Extension Switch 7800 User Manual

Page 12

Advertising
background image

xii

Brocade 7800 Extension Switch Hardware Reference Manual

53-1001350-04

2. Brocade 7800 Serial Number

The Brocade 7800 serial number and corresponding bar code are provided on the serial
number label, as illustrated below.:

The serial number label is located as follows:

Brocade 200E—On the nonport side of the chassis

Brocade 300, 4100, 4900, 5100, 5300, 7500, 7800, 8000, and Brocade Encryption
Switch
—On the switch ID pull-out tab located inside the chassis on the port side on the
left

Brocade 5000—On the switch ID pull-out tab located on the bottom of the port side of
the switch

Brocade 7600—On the bottom of the chassis

Brocade 48000—Inside the chassis next to the power supply bays

Brocade DCX—On the bottom right on the port side of the chassis

Brocade DCX-4S—On the bottom left on the non-port side of the chassis

3. World Wide Name (WWN)

Use the wwn command to display the product WWN.

If you cannot use the wwn command because the product is inoperable, you can get the
WWN from the same place as the serial number, except for the Brocade DCX. For the
Brocade DCX, access the numbers on the WWN cards by removing the Brocade logo plate
at the top of the nonport side of the chassis.

Document feedback

Quality is our first concern at Brocade and we have made every effort to ensure the accuracy
and completeness of this document. However, if you find an error or an omission, or you think
that a topic needs further development, we want to hear from you. Forward your feedback to:

[email protected]

Provide the title and version number of the document and as much detail as possible about
your comment, including the topic heading and page number and your suggestions for
improvement.

*FT00X0054E9*

FT00X0054E9

Advertising