Brocade Communications Systems Extension Switch 7800 - Manual (Page 34)

22 Brocade 7800 Extension Switch Hardware Reference Manual
53-1001350-04
Operating the Brocade 7800 Extension Switch
3
LEDs on the port side of the Extension Switch
The port side of the Extension Switch has the following LEDs:
• One system status LED (above) on the left side.
• One power status LED (below) on the left side.
• Management Ethernet port speed and activity LEDs.
• One port status LED for each Fibre Channel port on the Extension Switch. The port LEDs
are located in the array in the same relative positions as the ports.
• One port status LED for each optical GbE port.
• Two LEDs for each fixed copper RJ-45 GbE port, one activity/status LED and one fault LED.