Brocade 7800 features – Brocade Communications Systems Extension Switch 7800 User Manual

Page 14

Advertising
background image

2

Brocade 7800 Extension Switch Hardware Reference Manual

53-1001350-04

Introducing the Brocade 7800 Extension Switch

1

FastWrite over FCIP (not over FC)

Open Systems Tape Pipelining over FCIP

XRC acceleration and FICON tape pipelining over FCIP

FICON CUP

FCIP QoS

TCP performance graphing in Web Tools

The Brocade 7800 provides the following hardware features:

Up to 16 Fibre Channel SFP ports supporting Fibre Channel Routing Services with link
speeds up to 1, 2, 4, or 8 Gbps

Up to six 1 GbE ports supporting the FCIP and Fibre Channel Routing Services features
with transmit link speeds up to 1-Gbps on each port:

Two fixed copper RJ-45 ports are provided along with six SFP ports (copper or optical).
You can select either the two fixed copper RJ-45 ports or the first two SFP ports (both
designated as ge0 and ge1) for use (but not both). The SFP ports can be used with
either optical or copper SFPs.

The SFP ports can be configured to use either optical or copper cabling.

Rack mountable 1U chassis.

Two PPC440EPx Processors running @ 667 MHz.

One GoldenEye2 switch ASIC for 1/2/4/8 Gbps FC switching.

One Cavium CN 5740 running with eight MIPS cores @ 750 MHz for data path processing

One Blaster FPGA for FC compression, offloads like checksum generation/checks, etc.

One 10/100/1000 Base-T Ethernet port for management interface.

-

This port supports AutoMDI/MDIX.

One RJ45 terminal port.

One USB port that provides storage for firmware updates, output of the supportSave
command and storage for configuration uploads and downloads.

Two redundant, hot-swappable combined power supply/fan assembly FRUs.

Five internal temperature sensors.

Brocade 7800 Features

The following table compares features supported on the base and fully upgraded Brocade
7800. It also shows optionally licensed features.

TABLE 1

Feature comparison - base 7800 and with the Upgrade License

Feature

Base 7800

with Upgrade
License

Number of Fibre Channel ports

4

16

Number of GbE ports

2

6

Fibre Channel routing between remote fabrics for fault
isolation

Yes

1

Yes

1

FCIP Tunnel

Yes

Yes

Number of FCIP tunnels

2

8

Advertising