Philips SHAVER Series 9000 Nass- und Trockenrasierer - Manual (Page 16)

Cleaning reminder
For optimal shaving performance, we advise you to clean
the shaver after every use.
- When you switch off the shaver, the cleaning reminder
flashes to remind you to clean the shaver.
Travel lock
You can lock the shaver when you are going to travel.
The travel lock prevents the shaver from being switched
on by accident.
Activating the travel lock
1 Press the on/off button for 3 seconds to enter the
travel lock mode.
, While you activate the travel lock, the travel lock
symbol lights up white continuously. When the travel
lock is activated, the shaver produces a sound and the
travel lock symbol flashes.
Deactivating the travel lock
1 Press the on/off button for 3 seconds.
, The travel lock symbol flashes and then lights up
continuously.
The shaver is now ready for use again.
Note: You can also deactivate the travel lock by connecting the
appliance to the mains.
Replacing shaving heads
For maximum shaving performance, we advise you to
replace the shaving heads every two years.
- The appliance is equipped with a replacement reminder
which reminds you to replace the shaving heads. The
replacement reminder lights up white continuously and
the arrows flash white. You hear a beep to indicate you
have to replace the shaving heads.
ENGLISH 16