Philips SHAVER Series 9000 Nass- und Trockenrasierer - Manual (Page 21)

Using the beard styler attachment
1 Make sure the appliance is switched off.
2 Pull the shaving unit straight off the appliance.
Note: Do not twist the shaving unit while you pull it off the
appliance.
3 Insert the lug of the beard styler attachment into the
slot in the top of the appliance. Then press down the
beard styler attachment to attach it to the appliance
(‘click’).
Using the beard styler attachment with comb
You can use the beard styler attachment with the comb
attached to style your beard at one fixed setting, but also
at different length settings. The hair length settings on the
beard styler attachment correspond to the remaining hair
length after cutting and range from 1 to 5mm.
1 Slide the comb straight into the guiding grooves on
both sides of the beard styler attachment (‘click’).
2 Press the length selector and then push it to the left
or right to select the desired hair length setting.
3 Press the on/off button once to switch on the
appliance.
4 You can now start styling your beard.
ENGLISH 21