Philips SHAVER Series 9000 Nass- und Trockenrasierer - Manual (Page 17)

Note: After replacing the shaving heads, you need to reset the
shaver by pressing the on/off button for 7 seconds.
Exclamation mark
Blocked shaving heads
- If the shaving heads are blocked, the exclamation mark
lights up orange continuously. The replacement reminder
and the cleaning reminder flash white alternately and
you hear a sound. In this case, the motor cannot run
because the shaving heads are soiled or damaged.
- When this happens, you have to clean the shaving heads
or replace them.
Overheating
- If the appliance overheats during charging, the
exclamation mark flashes orange.
- When this happens, the shaver automatically switches
off. Charging continues once the appliance is back to the
normal temperature.
Charging
Charging takes approx. 1 hour.
A fully charged shaver has a shaving time of up to
50 minutes.
Note: You cannot use the appliance while charging.
Charge the shaver before you use it for the first time and
when the display indicates that the battery is almost empty .
Charging with the adapter
1 Make sure the appliance is switched off.
2 Insert the small plug into the appliance (1)
and put the adapter in the wall socket (2).
ENGLISH 17