Philips SHAVER Series 9000 Nass- und Trockenrasierer - Manual (Page 28)

7 Place the retaining ring holder on the retaining ring (1),
place it on the shaving head (2) and turn it clockwise
(3) to reattach the retaining ring.
Repeat this process for the other retaining rings.
8 Reattach the shaving head holder to the bottom part
of the shaving unit.
Cleaning the click-on attachments
Cleaning the trimmer attachment
Clean the trimmer attachment every time you have used it.
1 Switch on the appliance with the trimmer
attachment attached.
2 Rinse the trimmer attachment under a hot tap for
some time.
3 Carefully shake off excess water and let the
trimmer attachment dry.
4 After cleaning, switch off the appliance.
Tip: For optimal trimmer performance, lubricate the trimmer
teeth with a drop of sewing machine oil every six months.
Cleaning the beard styler attachment
Clean the beard styler attachment every time you have used it.
1 Pull the comb off the beard styler attachment.
2 Rinse the beard styler attachment and the comb
separately under a hot tap for some time.
3 Carefully shake off excess water and let the beard
styler attachment and comb dry.
4 Lubricate the teeth with a drop of sewing machine
oil every six months.
ENGLISH 28