Philips SHAVER Series 9000 Nass- und Trockenrasierer - Manual (Page 25)

Note: If you remove the adapter from the wall socket during
the cleaning program, the program aborts.
Note: 30 minutes after the cleaning program and charging
have been completed, the SmartClean switches off
automatically.
Replacing the cartridge of the SmartClean
System
- Replace the cleaning cartridge when the replacement
symbol flashes orange or when you are no longer
satisfied with the result.
1 Press the button on the side of the SmartClean
system (1) and lift the top part of the SmartClean
system (2).
2 Take the empty cleaning cartridge from the
SmartClean system and pour any remaining cleaning
fluid out of the cleaning cartridge.
You can simply pour the cleaning fluid down the sink.
3 Throw away the empty cleaning cartridge.
4 Unpack the new cleaning cartridge and pull the seal
off the cartridge.
5 Place the new cleaning cartridge in the SmartClean
system.
6 Push the top part of the SmartClean system back
down (‘click’).
ENGLISH 25