New Buck Corporation 18 - Manual (Page 5)

INSTALLATION, OPERATION, AND
MAINTENANCE INSTRUCTIONS
MODEL 18
READ THIS FIRST
IMPORTANT INSTRUCTIONS
WARNING
THESE UNITS GENERATE A LOT OF HEAT, SO TREAT THEM WITH CARE. HOT
WHILE IN OPERATION. KEEP CHILDREN, CLOTHING AND FURNITURE AWAY.
CONTACT MAY CAUSE SKIN BURNS. READ ALL INSTRUCTIONS BEFORE
INSTALLING AND USING THE APPLIANCE. FAILURE TO FOLLOW INSTRUCTIONS
MAY RESULT IN PROPERTY DAMAGE, BODILY INJURY, OR EVEN DEATH. SAVE
THESE INSTRUCTIONS FOR FUTURE REFERENCES.
* The New Buck Corp., non-catalytic system has been tested by Intertek Testing Services,
Warnock Hersey to ANSI/UL Standards 1482.
* Install and operate your units according to instructions provided in this manual. Local
building codes may apply; therefore, contact your local building inspector or fire marshall for
necessary installation requirements and permits which may go beyond these instructions.
* If appliance is installed in mobile homes: “DO NOT INSTALL IN SLEEPING
ROOMS.”
* Examine the masonry fireplace and chimney prior to installation of the fireplace accessory to
determine that the construction meets the minimum fireplace construction requirements
illustrated in the instructions, that it is free from cracks, loose mortar, creosote deposits and
other blockage, or other signs of deterioration.
CAUTION
DO NOT USE MORE THAN ONE STOVE TO A CHIMNEY. DO NOT USE A FLUE
INTENDED FOR A GAS APPLIANCE. DO NOT CONNECT THIS UNIT TO A CHIMNEY
FLUE SERVING ANOTHER APPLIANCE. DO NOT CONNECT TO ANY AIR
DISTRIBUTION DUCT OR SYSTEM.
* A factory-built prefabricated chimney may be used for your units when installed in
compliance with the manufacturer's specification and uniform building code.
3