Philips 4 HD SMALL CLOCK VCR - Manual (Page 21)

REW
PLAY
POWER
VCR PLUS+
/ENTER
SPEED
VCR
TIME SEARCH
TV
MUTE
CABLE
/DSS
VCR/TV
CHANNEL
VOLUME
REC/OTR
STATUS/EXIT
MEMORY SLOW PAUSE/STILL
MENU CLEAR EJECT
STOP
F.FWD – +
1 2 3
4 5 6
7 8 9
0 +100
• Although the remote control that
comes with your VCR will work most
Cable Boxes and Satellite Systems, it
is possible that the remote control will
not operate your Cable Box or
Satellite System.
• The remote control may only operate
some features of your Cable Box or
Satellite System. For example, some
Cable Boxes may only be turned on
at the Cable Box, therefore the
remote control will not be able to
turn on the Cable Box.
• If you had to program the remote
control to operate your Cable Box or
Satellite System here, whenever you
replace the batteries in the remote
control, you will have to program the
remote control again.
Helpful Hints
HAMLIN . . . . . . . . .21, 22
JERROLD . . . .01, 02, 03,
. . . . . . . . .04, 05, 06, 07
OAK . . . . . . . . .16, 17, 18
PANASONIC . . . . .19, 20
PIONEER . . . . . . . .11, 12
SCIENTIFIC
ATLANTA . . . . .08, 09, 10
TOCOM . . . . . .23, 24, 25
ZENITH . . . . . .13, 14, 15
Cable Box/DSS Code Setting 21
4
Within 30 seconds after releasing the MUTE button, press and
release the CABLE/DSS button.
3
Press and release the MUTE button.
5
Within 30 seconds after releasing the CABLE/DSS button, use the
Number buttons to enter the two-digit code for your Cable
Box or Satellite System. For example, if you have a Zenith Cable
Box, press Number buttons 1, 3.
Your VCR remote control may operate your Cable Box or
Digital Satellite System. If the remote control doesn’t operate
your Cable Box or Satellite System now, follow the steps below
to program your remote control.
1
Point the remote control at your Cable Box or Satellite System and
press the CABLE/DSS button. Then, press the POWER but-
ton. If your Cable Box or Satellite System comes on, try the other
Cable Box buttons (see pages 22 - 23 for details). If your Cable Box
or Satellite System doesn’t come on, or if the other buttons don’t
work, go to step 2.
2
Find the brand of your Cable Box or Satellite System on
the list below, and remember the two-digit number to
the right of it.
6
Try step 1 again. If the remote control works your Cable Box
or Satellite System, you’re finished. If the remote control still
doesn’t work your Cable Box or Satellite System, repeat steps 2 -
5, using a different code.
There is no guarantee that the
remote control will work your
Cable Box or Satellite System.
CABLE BOX/SATELLITE SYSTEM CODES
1&6 2 Find
your
code.
3
4
5