Philips 4 HD SMALL CLOCK VCR - Manual (Page 31)

REW
PLAY
POWER
VCR PLUS+
/ENTER
SPEED
VCR
TIME SEARCH
TV
MUTE
CABLE
/DSS
VCR/TV
CHANNEL
VOLUME
REC/OTR
STATUS/EXIT
MEMORY SLOW PAUSE/STILL
MENU CLEAR EJECT
STOP
F.FWD – +
1 2 3
4 5 6
7 8 9
0 +100
One Touch Recording 31
2
Press the CHANNEL (Up/Down) buttons or the Number
buttons to select the channel you want to record.
OTR (0:30)
CH12
3
Press the REC(ord)/OTR button repeatedly until the
desired recording length (30 minutes to eight hours) appears in
the upper left corner of the screen. Recording will begin immedi-
ately.
The one touch recording (OTR) function allows you to program
an immediate timed recording 30 minutes to eight hours long
without setting the timer. Before you begin, make sure:
● Channels are programmed.
● The desired recording speed (SP, LP, or SLP) has been selected
with the (Tape) SPEED button.
● There is a tape in the VCR. Make sure the tape’s record tab is
intact and the tape is long enough to record the program(s).
● The VCR is in VCR position. The VCR light will appear on the
display panel if the VCR is in VCR position.
4
To stop an OTR before recording is finished, press the
STOP button or the POWER button. To cancel the OTR but
continue recording, press the REC(ord)/OTR button until the
OTR display disappears from the screen. The REC light will
remain on the display panel of the VCR.
• To check the time remaining for an
OTR after the OTR has been set,
press the STATUS/EXIT button.
• To change the recording length
while an OTR is in progress, press
the REC(ord)/OTR button until the
desired length appears on-screen.
• If you begin an OTR when a record-
ing is paused, the OTR will begin.
• You can not pause recording (for
example, during commercials) dur-
ing an OTR.
• If the preset time for a timer
recording comes up during an OTR,
the OTR has priority.
Helpful Hints
2
3
4
1
Press the VCR button.
1