Philips 4 HD SMALL CLOCK VCR - Manual (Page 43)

Real Time Counter Memory 43
• The MEMORY button does not
function when REPEAT PLAY is set
to ON. To turn REPEAT PLAY OFF,
see the Helpful Hints on page 41.
• To erase a Real Time Counter
Memory, press the MEMORY but-
ton until the M disappears from the
screen.
• You may only set the real time
counter to zero at one location at a
time. If you try to set the real time
counter to zero at a second loca-
tion, the previous real time counter
to zero setting will be erased.
Helpful Hints
STOP 1:08PM
CH10
SLP 1 : 23 : 45
Real Time Counter Memory
Follow the steps below to reset the real time counter to zero at a
tape location you want to refer to later.
1
Play, fast forward, or rewind a tape to the location that
you would like to refer to later. Press the STOP button
or the STOP/EJECT button to stop the tape.
2
Press the STATUS/EXIT button. The status display will
appear on-screen for about five seconds.
3
While the status display is still on-screen, press the CLEAR
button to reset the real time counter to zero.
STOP 1:08 PM
CH10
SLP 0 : 00 : 00
4
While the real time counter is still on-screen, press the
MEMORY button so that M appears to the left of the real
time counter on-screen.
STOP 1:08 PM
CH10
SLP M 0 : 00 : 00
5
To go to a tape location where the real time counter was reset to
zero, press the REW(ind) button or the F.FWD button
when playback is stopped. When the tape reaches the point at
which the real time counter was reset to zero, the tape will stop.
Press the PLAY button to watch the tape.
REW
PLAY
POWER
VCR PLUS+
/ENTER
SPEED
VCR
TIME SEARCH
TV
MUTE
CABLE
/DSS
VCR/TV
CHANNEL
VOLUME
REC/OTR
STATUS/EXIT
MEMORY SLOW PAUSE/STILL
MENU CLEAR EJECT
STOP
F.FWD – +
1 2 3
4 5 6
7 8 9
0 +100
1
2 3
4
5