Philips 4 HD SMALL CLOCK VCR - Manual (Page 28)

28 Playing
• If the tape you want to play is
already in the VCR, make sure the
VCR power is on and the VCR is in
VCR position. (The VCR light will
appear on the display panel.) Press
the VCR button, then press the
PLAY button.
• Other playback options and fea-
tures are on pages 41 - 45.
Helpful Hints
Read and follow the steps below to play a tape.
1
Turn the TV on and set it to channel 3 or 4, whichever the
CH3/CH4 switch on the back of the VCR is set to.
2
Insert a tape in the VCR. The power will come on. The VCR
will place itself in VCR position automatically (the VCR light and
the Cassette-Inside light on the display panel of the VCR will
appear). If the tape’s record tab has been removed, playback will
start automatically.
6
When the tape stops, press the EJECT button on the
remote control or the STOP/EJECT button on the VCR to
remove the tape.
3
If playback does not start automatically, press the PLAY button
to start playback.
4
Press the STOP button on the remote control or the
STOP/EJECT button on the VCR once to stop playback.
5
Press the REW(ind) button on the remote control or the
VCR to rewind the tape.
1 Turn on the TV.
2 Insert a tape in the VCR.
REW
PLAY
POWER
VCR PLUS+
/ENTER
SPEED
VCR
TIME SEARCH
TV
MUTE
CABLE
/DSS
VCR/TV
CHANNEL
VOLUME
REC/OTR
STATUS/EXIT
MEMORY SLOW PAUSE/STILL
MENU CLEAR EJECT
STOP
F.FWD – +
1 2 3
4 5 6
7 8 9
0 +100
6
3
4
5