Philips SGC2910-27 - Manual (Page 4)

4
EN
Controller Diagram
Button Descriptions
• Directional Pad-Represents UP, DOWN, LEFT, RIGHT and four diagonals . Directional pad will function as POV
(Point of View) hat during analog mode .
• Buttons “1”, “2”, “3”, and “4” are default fire buttons and are digital in nature.
• Left analog and right analog sticks - each contain two axes . Left analog stick controls the X and Y axis . Right
analog stick controls the Rz and Z axis . Also, there is a “hidden” button “11” and “12” under each stick that are
activated when the analog stick is depressed inward . The ‘hidden’ buttons function in both analog and digital
modes .
• Buttons “5”, “6”, “7”, and “8” are all digital shoulder buttons .
• Analog button - used to switch the controller from digital to analog mode (and vice versa) . Digital mode is the
default mode . The red LED will illuminate when the controller is in analog mode and off in digital mode .
• Turbo Button - Use when desiring to engage the controller in a repeating mode (Auto Fire)
• Start / Select buttons-serve as digital buttons (9,10) See game manual for use of these buttons
• F . Connect Button - This button is found on the SGC2910 Wireless PC Controller and on the docking receiver
marked with PHILIPS logo . This button is used to force link a SGC2910 Wireless PC Controller and docking
receiver . An advanced feature of this function is as follows; Suppose player 2 wants to change to player 1, just
press the F .Connect button on his SGC2910 Wireless PC Controller, then press the F .Connect button on the
player 1 receiver, his controller will become player 1 controller .
Power Switch
The power switch is located on the back of the SGC2910 Wireless PC Controller . The switch can be set to three
settings as shown in the CONTROLLER DIAGRAM (photo 3) image . Off setting will turn the SGC2910 Wireless
PC Controller power off . On setting turns the SGC2910 Wireless PC Controller power on . Vibration off setting
turns the SGC2910 Wireless PC Controller power on, but the vibration feedback is powered off to conserve
battery and enable longer playing time .
Controller Diagram