Philips SGC2910-27 - Manual (Page 9)

EN
9
EN
8 . In Windows XP and Windows 2000, the SGC2910 Wireless PC Controller should be connected to your PC
before beginning software installation . If the SGC2910 is not connected to your PC, the following warning
message will appear . If this message appears, you must connect the SGC2910 Wireless PC Controller to the
computer . You may need to wait a few seconds for Windows to load the HID drivers . Once completed, you
can click the “OK” button .
9 . When the PC detects the SGC2910 Wireless PC Controller, the following message will appear and ask you
to disconnect the controller . Once you have disconnected the SGC2910, you should click the ‘OK’ button .
If the message reappears you should wait several seconds and then click the ‘OK’ button . Some PCs require
several seconds to detect the SGC2910 as disconnected .
Installation