4 unregister a handset, 5 change the system pin, 6 reset the default settings – Philips Internet-DECT phone VOIP8411B User Manual
Page 34: 8 network settings, Network settings
32
Settings
program the handset to automatically connect to
the closest base unit. You can also program the
handset to only connect to a fixed base unit you
have specified.
Note
Your handset must be registered to the base units
you want to select beforehand.
In idle mode:
Press .
Scroll to Settings. Press
.
Scroll to Handset. Press
.
Scroll to Select Base. Press
.
Scroll to the base unit you want or select
Auto if you want your handset to
automatically connect to the closest base
unit.
Press .
• The new setting is saved.
8.7.4 Unregister a handset
Use one handset to unregister another handset
that shares the same base unit.
In idle mode:
Press .
Scroll to Settings. Press
.
Scroll to Handset. Press
.
Scroll to De-register. Press
.
Scroll to the handset (number) you want to
delete. Press
.
Tip
The handset number displays beside the word
“Skype” during standby. For example, Skype (1).
Enter the system PIN (Default: 0000). Use
to make corrections.
Press
to
confirm.
• The handset is unregistered.
8.7.5 Change the system PIN
The system PIN is used for registering, deleting
handsets, and protecting the access rights to
some of the other menus. The default system PIN
is 0000. You can personalize the PIN for greater
security.
In idle mode:
Press .
Scroll to Settings. Press
.
Scroll to Handset. Press
.
Scroll to Change PIN. Press
.
Enter the system PIN. Press
to
confirm. Use
to make corrections.
Enter the new system PIN. Press
.
Enter the new system PIN again for
verification. Press
.
• The new setting is saved.
Note
Write down your PIN and save it for future use.
If you have forgotten the PIN, call your dealer for
assistance.
8.7.6 Reset the default settings
The default settings are the original factory
settings of your phone. You can reset your phone
settings to factory default. You can reset all the
settings, but keep the network settings.
In idle mode:
Press .
Scroll to Settings. Press
.
Scroll to Advanced. Press
.
Scroll to Reset Device. Press
.
Scroll to Reset All to reset all the settings
including the network settings,
OR
Scroll to Keep Network to reset all the
settings except the network settings.
Press
. Enter the system PIN. Press
to confirm. Use
to make
corrections.
• A confirmation request is displayed.
Press
to confirm.
• All settings have reset.
Note
After reset, your handset's power switches off. It
will switch back on in a few seconds after
updating all the settings.
To find out what settings are being reset, see
“Default settings”, page 36.
8.8
Network settings
This section describes the information on viewing
and changing the internet network settings of
1
Menu
2
Select
3
Select
4
Select
5
6
Select
1
Menu
2
Select
3
Select
4
Select
5
Enter
6
Clear
7
Enter
1
Menu
2
Select
3
Select
4
Select
5
Enter
Clear
6
Enter
7
Enter
1
Menu
2
Select
3
Select
4
Select
5
5
6
Select
Enter
Clear
7
Yes