Optional bracket installation (f1dp104aea), Step 1, Step 2 – Belkin F1DP108AEA User Manual
Page 17
Advertising
14
Installation
Optional Bracket Installation (F1DP104Aea)
The SMB 4-Port CAT5 KVM Switch can be installed into a 19-inch server rack
using an optional OmniView Rack-Mount Kit (F1D005).
Step 1
Attach the Rack-Mount Bracket to your SMB CAT5 KVM Switch using the
Phillips screws provided. (Refer to diagram below.)
Step 2
Mount the SMB CAT5 KVM Switch to the rack-rail assembly. (Refer to
diagram below.)
NOTE: If this SMB CAT5 KVM Switch will be daisy-chained to another KVM
switch, set the BANK address prior to installing on a rack. Refer to the section
titled “Connecting Multiple SMB CAT5 KVM Switches (Daisy-Chaining)” in this
User Manual.
Your SMB CAT5 KVM Switch is now mounted securely to the rack and
you are ready to connect the console.
Advertising
This manual is related to the following products: