Belkin F1DP108AEA - Manual (Page 6)

3
1
2
3
4
5
6
7
8
se
ct
io
n
3
Overview
• Front-Panel Push Buttons
Direct-access port selectors, located conveniently on the front panel of the
SMB CAT5 KVM Switch, allow for simple, manual port-selection.
• AutoScan
The AutoScan feature allows you to set your SMB CAT5 KVM Switch to scan
and monitor the activities of all connected servers, one by one. The time
interval allotted for each server can be defined or adjusted through the On-
Screen Display (OSD) menu.
• LED Display
An LED display on the front panel of the SMB CAT5 KVM Switch serves as a
status monitor. An LED above each direct-access port selector illuminates to
indicate that the console currently controls the corresponding server. As a port
selector is pushed, the LED above it will light up. A flashing port LED indicates
that there is no server connected to that port.
• Seven-Segment LED Display
When daisy-chaining multiple SMB CAT5 KVM Switches together, the
seven-segment LED display serves as a quick indicator of the selected BANK.
• Flash Upgrade
Flash-upgradeable firmware allows you to install the latest firmware for your
SMB CAT5 KVM Switch. This enables your KVM Switch to maintain consistent
compatibility with the latest devices and servers. Firmware upgrades are
free for the life of your SMB CAT5 KVM Switch and can be downloaded from
Belkin’s support website at www.belkin.com/support.