Belkin F1DP108AEA - Manual (Page 36)

33
se
ct
io
n
1
2
3
4
5
6
7
8
Using Your SMB CAT5 KVM Switch Using Your SMB CAT5 KVM Switch Using Your SMB CAT5 KVM Switch
ON-SCREEN Display
The On-Screen Display allows you to switch servers, assign names to your
servers, enable and disable the AutoScan feature, set the desired scan time
interval for AutoScan, enable the password security feature, and program hot
keys. To access the On-Screen Display (OSD) menu, press “Scroll Lock”,
“Scroll Lock”, and the space bar. Immediately, the OSD overlay screen will
appear. The superimposed menu screen is generated by the SMB CAT5 KVM
Switch, and does not affect the function of your server, operating system, or
software function.
Main OSD Menu Page
The main OSD menu displays the current selected BANK and connected servers
to that BANK. If you have only one SMB CAT5 KVM Switch in your configuration,
the OSD menu will display “BANK 00”. A “ ” symbol indicates that the
connected server is powered up. If the OSD menu does not display a “ ”
symbol for a server that is connected and powered up, you will need to reset the
SMB CAT5 KVM Switch to re-detect the server. This is done by simultaneously
pressing the “BANK +” and “BANK –” buttons on the front panel.