Philips 231T1SB-00 - Manual (Page 14)

12
Note
If you cannot locate your remote control and •
want to switch on the TV from standby, press
CH +/- at the side of the TV.
Switch channels
Press • CH ^/v on the remote control or
CH +/- on the side of the TV.
Enter a channel number using the •
Numeric buttons.
Use the channel grid. •
Note
When you use a favourite list, you can only •
select those channels in the list.
5 Start to use
This section helps you perform basic TV
operations.
Switch your TV on/off or to
standby
To switch on
If the standby indicator is off, press •
POWER at the side of the TV.
If the standby indicator is red, press •
(Standby-On) on the remote control.
To switch to standby
Press • (Standby-On) on the remote
control.
The standby indicator switches to red. »
To switch off
Press • POWER at the side of the TV.
The standby indicator switches off. »
Tip
Though your TV consumes very little power •
when in standby, energy continues to be
consumed. When not in use for an extended
period of time, disconnect the TV power cable
from the power outlet.
EN