Philips 231T1SB-00 - Manual (Page 18)

16
Channel Scan
Use this function to fi nd and store all available •
channels automatically in both digital and analog
mode.
Press MENU + UP / DOWN button to ►
select TV.
Press OK + UP / DOWN button to
►
select Channels.
Press OK + UP / DOWN button to
►
select Channel Scan.
Press OK button to execute the Channel
►
Scan.
Channel Scan scan both the digital and »
analog channels, fi rst scan digital channels
and analog channels last.
Channel Scan will erase all old stored »
channels scanned by previous execution.
Digital channel number will assign by »
LCN (Logical Channel Number) if LCN
is exist.
Digital channel which no LCN or LCN »
confl ict will assign from 800 to 899.
Analog channels will assign from 901 »
to 999, if have channel name, will assign
from 901, others will assign by frequency,
27%
Exit Cancel
Status: Scanning.
Analog Channels: 0
Digital Channels: 0
1st Audio and 2nd Audio
(Digital TV only)
The Audio function allows selection of a •
preferred language.
If audio data in a selected language is not •
broadcast, the default language audio will be
played.
When the languages you selected as the primary •
for Audio Language are not supported, you can
select language in secondary category.
Press MENU + UP / DOWN button to ►
select TV.
Press OK + UP / DOWN button to
►
select 1st Audio and 2nd Audio.
Press LEFT / RIGHT button to select the
►
item.
Exit Back
Country UK
2nd Audio English
Channels
EN