2 input channel banks – Behringer 32-Channel User Manual
Page 13
13
X32 DIGITAL MIXER Preliminary User Manual
2.2 Input Channel Banks
(7)
LAYER SELECT – Select either the channels 1-16, channels 17-32,
Aux In/USB/FX Returns, or Bus Masters layer with these 4 buttons.
The currently active layer will light.
(8)
DAW REMOTE – Press this to enable DAW remote control.
(9)
SELECT – Press this button to select an input or bus (depending which layer
is active) and allow it to be edited by the Channel Strip and Main Display.
(10)
CHANNEL METER – This displays the signal level of the input or bus
(depending which layer is active). The Gate and Comp LEDs light to indicate
that noise gate and/or compression are active.
(11)
SOLO – Press this button to send the channel to the Solo Bus.
(12)
MINI DISPLAY – Information such as channel number,
nickname, input source and graphical icon are displayed on this
color LCD screen.
(13)
MUTE – Press this button to mute the channel.
(14)
FADER – Use this to adjust the channel volume or bus send in ’Sends on
Faders’ mode. The faders will automatically display the current status as
layers and functions are changed.
(9)
(8)
(10)
(11)
(12)
(13)
(14)
(7)