Bissell PROHEAT 25A3 - Manual (Page 12)

w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
O
perations
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
12
7.
ReadyTools
™
Your PROheat deep cleaner comes equipped
with a hose and at least one attachment for
cleaning stairs, upholstery, and more.
Important! If using the machine to clean
upholstery, check upholstery tags.
1. Check manufacturer’s tag before cleaning. “W”
or “WS” on the tag means you can use your
PROheat. If the tag is coded with “X” or “S”
(with a diagonal strike through), or says “Dry
Clean Only,” do not proceed. Do not use on vel-
vet or silk. If manufacturer’s tag is missing or not
coded, check with your furniture dealer.
2. Check for colorfastness in an inconspicuous place.
3. If possible, check upholstery stuffing. Colored
stuffing may bleed through fabric when wet.
4. Plan activities to give upholstery time to dry.
5. Vacuum thoroughly to pick up loose debris
and pet hair. Use a vacuum with a brush
attachment and a crevice tool to clean fabric
folds and tufts.
6. To begin cleaning with attachments, follow
the instructions on page 9 for filling the 2-in-1
water tank.
7. Set the ReadyTools dial to the "TOOLS"
setting. This will allow spray and suction from
the hose.
8. Attach the cleaning tool of your choice to the
end of the hose.
9. Clean by pressing the trigger to spray solution
onto the area to be cleaned. Slowly move the
tool back and forth over the soiled surface.
Release the trigger to suction dirty water.
Continue to clean in the area, working in small
sections, until dirt is removed.
Caution: Do Not Overwet.
10. When finished cleaning, remove and rinse
tool(s) in clean, running water.
Adsdfdd ghg bvh cvbbj jkn hnbj
jkvh
gcghhjj jhffhl kllgh
Manufacturer’s tag