Bissell PROHEAT 25A3 - Manual (Page 13)

w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
13
O
perations
ReadyTools
™
Continued
11. It is recommended that you suction clean
water from the tap to rinse out the hose.
12. Before wrapping hose onto tool rack, lift
end of hose and stretch out to ensure all
water is cleared from hose.
13. Wrap flex hose around tool rack.
14. Empty 2-in-1 water tank and rinse out,
following instructions on page 11.
15. If the ReadyTools dial becomes difficult to
turn, the diverter assembly that holds the
dial may need to be cleaned. To clean,
first remove nozzle and locate screw that
holds the diverter assembly in place. With
a Phillips screwdriver, remove the screw
and set aside.
16. Remove diverter assembly; hold under
running water making sure water flows
through and around the dial. Turn the dial
about 10 times clockwise and 10 more
times counter clockwise. This should free
up any debris.
17. Wipe diverter assembly with a soft cloth
and replace back on machine. Replace
nozzle.
18. Return ReadyTools dial to "FLOOR
CLEANING" setting.
11.
15.
12.
16.
Screw
Run water through here