Philips C271P4QPJEW-27 - Manual (Page 16)

14
2. Setting up the monitor
Height adjustment
150mm
Pivot
3
90
0
2.3 Remove the Base Assembly for
VESA Mounting
Before you start disassembling the monitor
base, please follow the instructions below to
avoid any possible damage or injury.
1. Place the monitor face down on a smooth
surface. Pay attention not to scratch or
damage the screen.
2. Remove the base assembly.
Note
This monitor accepts a 100mm x 100mm
mounting interface.
(Screw type: M4x10)
HDMI
100mm
100mm