Philips 197E3LSU-00 - Manual (Page 6)

4
2. Setting up the monitor
VGA (optional) DVI (optional)
Register your product and get support at www.philips.com/welcome 197E3L
Quick Start
Install base stand
1. Place the monitor face down on soft and
smooth surface taking care to avoid scratching
or damaging the screen.
2. Hold the monitor base stand with both hands
and firmly insert the base stand into the base
column.
(1) Gently attach the base to the base column
until the latch locks the base.
(2) Use your fingers to tighten the screw
located at the bottom of the base, and
secure the base to the column tightly.
1
2
2. Setting up the monitor
2.1 Installation
Package contents