Philips 197E3LSU-00 - Manual (Page 7)

5
2. Setting up the monitor
Connecting to your PC
AC power input
VGA
input
DVI-D input
Kensington anti-theft lock
Connect to PC
1. Connect the power cord to the back of
the monitor firmly.
2. Turn off your computer and unplug its
power cable.
3. Connect the monitor signal cable to the
video connector on the back of your
computer.
4. Plug the power cord of your computer
and your monitor into a nearby outlet.
5. Turn on your computer and monitor. If
the monitor displays an image, installation
is complete.
2.2 Operating the monitor
Front view product description
197E3L
197E3L (for 1A model)
Switch monitor’s power on and
off.
Access the OSD menu.
Return to previous OSD level.
Change display format.
Adjust the brightness level.
Adjust the OSD menu.
Change the signal input source.
Change display format.
SmartImage Lite. There are three
modes to be selected: Standard,
Internet and Game.
4
5
6 2 3 4 7
5
6 2 3 4 7