Philips 197E3LSU-00 - Manual (Page 9)

7
2. Setting up the monitor
Resolution notification
This monitor is designed for optimal performance
at its native resolution, 1366×768@60Hz.
When the monitor is powered on at a different
resolution, an alert is displayed on screen: Use
1366×768@60Hz for best results.
Display of the native resolution alert can be
switched off from Setup in the OSD (On Screen
Display) menu.
Physical Function
Tilt
2.3 Remove Base Stand and Base
Remove the Base Stand
Before you start disassembling the monitor base,
please follow the instructions below to avoid
damage or injury.
1. Place the monitor face down on a smooth
surface, taking care to avoid scratching or
damaging the screen.
2. Detach the base stand away from the base
column by:
(1) Use your fingers to loosen the screw
located at the bottom of the base
(2) Gently move up-and-down to release the
latch that locks the base and pull the base
away from the base column.
2
1