West Bend Back to Basics UX-CC500 - Manual (Page 20)

Setting Up
18
Installing the battery and charging the cordless handset
1
Connect the battery connector ➊
1
Connect the battery connector ➊ , and then place the battery pack in the
cordless handset.
•
Place the wires as shown.
2
Place the battery cover on the cordless
handset, making sure it snaps firmly
into place.
•
Make sure the wires are not caught or
pinched by the cover.
3
Place the cordless handset in the
charger with the dial pad facing
forward.
•
Important! The dial pad must face
forward, or the battery will not charge.
•
The battery charges automatically while
the cordless handset is in the charger.
While charging, the display shows
CHARGING. When charging is
completed, the display shows IN
CHARGER.
•
The cordless handset and charger may
feel warm while charging. This is
normal.
The battery cannot be overcharged. When not using the cordless handset,
keep it in the charger to ensure that it is always charged.
Charge the battery
at least
10 hours
the first time!
Black
Red
Black
Red