West Bend Back to Basics UX-CC500 - Manual (Page 64)

Remote Operations
62
1
Press once and once.
2
Press once and twice.
3
Press .
4
Press the number keys to enter a 3-digit remote code number.
5
Press to store the remote
number.
6
Press to return to the date and time display.
FUNCTION
START/MEMORY
STOP
Remote Operations
When you are out, you can call the machine from any touch-tone telephone
and play back your messages using the remote commands. You can also use
these commands to change the reception mode and other settings.
Remote code number
After calling the machine, you must enter your remote code number to listen
to messages in the general box, or to messages in a personal box that does
not have a passcode.
The remote code number has been set to "001" at the factory. To change the
number, follow the steps below.
Display:
T.A.D. SETTING
REMOTE CODE
TRANSFER TEL #