West Bend Back to Basics UX-CC500 - Manual (Page 53)

Operating the Answering System
51
3. Ans
w
er
ing
Machi
n
e
♦
Each outgoing message will play (to stop playback, press ).
♦
It will not be possible to set the reception mode to TAD if a general outgoing
message has not been recorded.
Note: In TAD mode, the machine will automatically switch to fax reception if it
detects 6 seconds of silence after answering a call. For this reason, if a caller
pauses for this length of time while leaving a message, they will be cut off.
Number of rings in TAD mode (Toll Saver function)
The number of rings on which the machine answers incoming calls in TAD
mode depends on whether the Toll Saver function is turned on, and if it is on,
whether you have messages.
♦
The Toll Saver function is initially turned on.
STOP
To adjust the
NUMBER OF RINGS
setting, see page 83. To turn off the Toll Saver
function, see page 63.
ON OFF
No received messages
4 Rings
Received messages
2 Rings
Toll Saver Toll Saver
NOTHING Hello!
Hi! Hi!
Ring
Ring
Ring
Ring Ring Ring Ring
Ring
Ring
Ring
(Answer according to
NUMBER OF RINGS setting)