West Bend Back to Basics UX-CC500 - Manual (Page 51)

Setting a Passcode for a Personal Box
49
3. Ans
w
er
ing
Machi
n
e
4
Lift the handset.
5
Press and speak into the handset to record the message.
•
While recording, the display will show the time left to record.
6
When finished, replace the handset or press .
START/MEMORY
STOP
To listen to an outgoing message
To listen to an outgoing message, follow Steps 1 and 2 of the above
procedure and then press . Note that the general outgoing message
cannot be erased. If you need to change it, simply repeat the recording
procedure.
Setting a Passcode for a Personal Box
You can set a 3-digit passcode for each personal box. When this is done, the
passcode must be entered to listen to messages in a personal box at the fax
machine.
(Note: When listening to the messages in a personal box from its
corresponding cordless handset, is not necessary to enter the passcode. )
PLAY
1
Press once and once.
2
Press once and once.
3
Press .
FUNCTION
BOX PASSCODE
Display:
T.A.D. SETTING
1=SET, 2=CLEAR